DV1 - Standard BC fitting
DV2 - SeaQuest Style Quick Disconnect
DV3 - Scubapro Style Quick Disconnect
A DUAL FUNCTION SURFACE / SUBSURFACE SIGNALING DEVICE
DiveAlertPLUS is a specially designed, small, light weight pneumatic signaling device that uses quick-connect/disconnect hose couplings to become an integrated part of your power inflator. Installation is easy and takes only a moment.
DiveAlertPLUS uses a small amount of air from your SCUBA tank to make a piercingly loud sound in air or water. People have been able to hear a DiveAlertPLUS one mile away from a diver in need above water. In conditions where visibility is limited, a DiveAlertPLUS can be a life saver. Underwater you can sound for attention quickly with a squeeze of the device.
NO MODS REQUIRED
DiveAlertPLUS does not require any modification to your equipment, and it does not interfere with the normal operation of your equipment. The DiveAlertPLUS comes in three different models to accommodate different connectors: DV1, DV2, and DV3.
EASY TO USE DESIGN
Once the tank is turned on and the DiveAlertPLUSconnected, squeeze the DiveAlertPLUS softly underwater for a subsurface signal. Or squeeze it firmly on the surface for a loud surface signal blast. Check that the DiveAlertPLUS is installed correctly and functioning properly before every dive. Also be careful not to point the DiveAlertPLUS toward yourself or toward anyone who is in close proximity to you when you activate the surface signal (it’s really loud!).
One-Year Limited Warranty
Ideations design, Inc., warrants the DiveAlertPLUS to be free from defects in materials and workmanship for one year from the date of purchase from an authorized DiveAlertPLUS dealer. If any functional defects appear in a DiveAlertPLUS unit within the one-year warranty period,
DV1 - Standard BC fitting
DV2 - SeaQuest Style Quick Disconnect
DV3 - Scubapro Style Quick Disconnect
A DUAL FUNCTION SURFACE / SUBSURFACE SIGNALING DEVICE
DiveAlertPLUS is a specially designed, small, light weight pneumatic signaling device that uses quick-connect/disconnect hose couplings to become an integrated part of your power inflator. Installation is easy and takes only a moment.
DiveAlertPLUS uses a small amount of air from your SCUBA tank to make a piercingly loud sound in air or water. People have been able to hear a DiveAlertPLUS one mile away from a diver in need above water. In conditions where visibility is limited, a DiveAlertPLUS can be a life saver. Underwater you can sound for attention quickly with a squeeze of the device.
NO MODS REQUIRED
DiveAlertPLUS does not require any modification to your equipment, and it does not interfere with the normal operation of your equipment. The DiveAlertPLUS comes in three different models to accommodate different connectors: DV1, DV2, and DV3.
EASY TO USE DESIGN
Once the tank is turned on and the DiveAlertPLUSconnected, squeeze the DiveAlertPLUS softly underwater for a subsurface signal. Or squeeze it firmly on the surface for a loud surface signal blast. Check that the DiveAlertPLUS is installed correctly and functioning properly before every dive. Also be careful not to point the DiveAlertPLUS toward yourself or toward anyone who is in close proximity to you when you activate the surface signal (it’s really loud!).
One-Year Limited Warranty
Ideations design, Inc., warrants the DiveAlertPLUS to be free from defects in materials and workmanship for one year from the date of purchase from an authorized DiveAlertPLUS dealer. If any functional defects appear in a DiveAlertPLUS unit within the one-year warranty period, the unit will be either repaired or replaced at the option of Ideations design, Inc.
MAINTENANCE
After each use, the DiveAlert PLUS should be soaked with warm fresh water. This is especially important after use in chlorinated swimming pools and in other water having corrosive substances. Additionally, it is highly recommended that you blow the water out of the DiveAlert PLUS before storing. This can be done by pressurizing and activating both the surface and subsurface signaling elements. (We recommend that you cup your hand over the surface signaling element to muffle the loud noise.)
unit will be either repaired or replaced at the option of Ideations design, Inc.
MAINTENANCE
After each use, the DiveAlert PLUS should be soaked with warm fresh water. This is especially important after use in chlorinated swimming pools and in other water having corrosive substances. Additionally, it is highly recommended that you blow the water out of the DiveAlert PLUS before storing. This can be done by pressurizing and activating both the surface and subsurface signaling elements. (We recommend that you cup your hand over the surface signaling element to muffle the loud noise.)